Why is my old electrical cable insulation crumbling to powder when I touch it – Advice from Electriman, North London Electricians

What you are seeing is the result of very old cable insulation that has simply reached the end of its usable life. Most cables installed in UK homes before the mid-1970s used rubber insulation, and rubber does not last forever. Over decades of heat cycling, oxidation, and exposure to air, it breaks down until it becomes brittle and eventually turns to a dry powder or crumbles like old putty when touched. Some very early PVC cables from the 1960s can behave the same way if they were made with lower-quality plasticisers that have since leached out.

Why does this matter so much? The insulation is the only thing standing between the live copper conductor and everything around it, including other cables, wooden joists, plaster, and you. Once it is gone, a live wire can touch something it should not touch, which can cause a fire inside your walls or ceiling, or give someone a potentially fatal electric shock.

Here is what you should do right now.

1. Stop touching or disturbing the cables. The more you handle them, the more insulation falls away.

2. Go to your consumer unit and switch off the circuit breaker or remove the fuse for the affected circuit.

3. Do not assume neighbouring circuits are safe. If you have found crumbling insulation in one place, the rest of the wiring from the same era is very likely in a similar or worse condition.

4. Check whether your home has a current Electrical Installation Condition Report, known as

Need a qualified electrician in North London?

Electriman covers Mill Hill, Barnet, Finchley, Edgware, Enfield, Watford and surrounding areas. All work is Part P certified and fully insured.